We offer
JINDAL Air Tile Adhesive – 110 is Ecofriendly premix mortar consisting of high performance polymers & self – curing polymers, well graded sand, cement, which is used for fixing small size tile fixing etc. Tile Adhesive ready to use grey cement based tile adhesive used for small sized ceramic & mosaic tiles for internal application. (Both walls & Floor)
JINDAL Air Tile Adhesive – 110 is basic (C0) tile adhesive for use small size tile fixing.
JINDAL Air Tile Adhesive 110 as per confirm IS: 15477 – 2004 for tile adhesive.
Coverage
A 20Kg bags of JINDAL Air Tile Adhesive 110 covers ̴55-60 Sq. ft. at coverage 3mm thickness. Coverage depends upon quality and nature of substrate being used also depends on application method, surface condition and masonry work.
Highlights & Features
Quality
- HIGH BOND STRENGTH: - It has excellent adhesive properties and bond better to substrate.
- HIGH SAG RESISTANCE: - Thixotropic formula, No-Sag, for easy application.
- EXTENDED OPEN TIME: - specially added polymers impart extended open time, leading to higher flexibility at the time of application.
- NO SHRINKAGE: - Water is retained in mortar, thus prevent shrinkage.
- ZERO WASTAGE: - It is easy to apply and avoid wastage of material.
- ECONOMICAL & TIME SAVING: - It is applied in thin layer which leads to cost saving & being premixed in nature saves times.
- WORKABILITY: - Improve Workability Flow, water retention and open time due to high performance polymers.
- ECO-FRIENDLY: - JINDAL Air block adhesive – TBJM is manufacturing in factory by products of industry helps to reduce carbon footprint at the time no water required for curing helps save water resources.
- SELF – LIFE: - Due to retention polymers, curing is not essential after the application.
Technical Specifications
| Parameters | Specifications |
|---|---|
| Mixed Density | 1.50 - 1.70 Kg/Ltr. |
| Bulk Density | 1.40 - 1.60 Kg/Ltr. |
| Pot Life | 120-180 Minutes |
| Open time | 10-20 Minutes |
| Tensile adhesion (Dry condition) | ≥ 750 |
| Tensile adhesion (Wet condition) | ≥ 450 |
| Shear adhesion (Dry condition - 24Hrs) | ≥ 2.50KN |
| Shear adhesion (Dry condition - 14Hrs) | ≥ 4.00KN |
| Shear adhesion (Heat aging condition) | ≥ 4.00KN |
| Shear adhesion (Wet condition - 24Hrs) | ≥ 4.00KN |
| Technical Data Sheet | Download |
| Method Statement | Download |
